Buga Duo 3812
vacuum press and industrial oven for thermoforming solid surfaces
from 38.500€
The vacuum press BUGA Duo 3812 It is a machine for thermoforming solid surfaces such as Corian®, Krion® and PMMA, with maximum heating capacity for industrial production.
It is a 2-in-1 solution in which the membrane press and industrial oven are combined in a single chassis to optimize workshop space without sacrificing efficiency, temperature control and thermoforming capacity.
Its patented technology makes the BUGA Duo one of the industrial thermoforming machines most efficient on the market for workshops that work with solid surfaces and thermoformable plastics.
The BUGA Duo is suitable for industrial production, with an approximate rate of 30 minutes per thermoformed piece in materials 12 mm thick.
Industrial control with touch screen, type J thermocouple and PT100 probe
Because heating solid surfaces should not depend solely on time, but also on precise temperature control throughout the entire process.
The machine is equipped with:
- An industrial programmable logic controller (PLC) operated via a touchscreen with 20 programmable menus.
- Two J-type probes to measure the internal temperature of the material.
- A PT100 probe that continuously monitors the oven temperature.
WORKING PARAMETERS
- Vacuum press with 2 mm silicone membrane resistant up to 230ºC
- Silicone membrane with 700% elasticity, shore A 60/65, specific weight 1,2 gr/cm3
- Becker brand maintenance-free vacuum pump, 40m3/h
- Maximum vacuum pressure: up to 9 t/m².
- Automatic or manual operating mode
- Multi-perforated metal vacuum table with a smooth paint finish
- Hot air oven with efficient circulation, using the patented "Turbo Hot Air" method.
- Maximum temperature: 190ºC
- Triple temperature control with J-type contact probes and PT100 probe.
- Oven insulation with 50 mm rock wool
- 15” touchscreen with 12 programmable menus
- Audible and visual end-of-cycle signal
- Temperature control monitored on screen during heating and cooling
- Industrial wheels with brakes
- Schneider Electric electrical components.
- Electrical connection 380V / 50-60Hz/ 3-phase
- Maximum electrical power 18,5 kW – 29 Amp
- Moderate electricity consumption: approximately 3 to 5 kW/h.
- 2 years warranty
GLASS OPTIONS
- 250 mm high cup membranes for working with molds from 250 to 650 mm high
- 500 mm high cup membranes for working with molds from 500 to 900 mm high
- Sublimation membrane + kit
THE HOT AIR OVEN
Hot air oven with efficient circulation.
- Patented "Turbo Hot Air" method.
- Maximum temperature: 190 °C.
- Temperature control with J-type contact probes and PT100 probe.
- 50 mm rockwool insulation
- 15″ touchscreen with 12 programmable menus.
- Audible and visual end-of-cycle signal.
- Temperature monitoring displayed during heating and cooling phases.
- 4 industrial wheels with brakes.
- Electrical panel featuring Schneider Electric components.
- Electrical connection 380 V / 50-60 Hz / 3-phase.
- Maximum electrical power: 18,5 kW – 29A.
- 2 years warranty
LA VACUUM PRESS
Vacuum press with 2mm silicone membrane resistant up to 230°C.
- Silicone membrane with 700% elasticity,
- Shore A 40/45 hardness,
- density of 1,2 g/cm³ and 2 mm thickness.
- Maintenance-free vacuum pump with a 40 m³/h capacity by Becker.
- Maximum vacuum pressure: up to 9 t/m².
- Automatic or manual operating mode.
- Multi-perforated metal vacuum table with a stove-enamelled finish.
DIMENSIONS
Buga Duo 3812
| Width | Length | Heigh | |
|---|---|---|---|
| Overall Machine Size | 1700 mm. | 4500 mm. | 1050 mm. |
| Useful Oven Interior | 1250 mm. | 3800 mm. | 110 mm. |
| Useful Press Size | 1300 mm. | 3900 mm. | 400 mm (with mould) |
| External frame Size | 1400 mm. | 4080 mm. | 50 mm. |
Total machine weight: 1750 kg.
