Buga Duo 3015
The new BUGA Duo 3015, the result of months of development, combines a high-performance industrial oven with a 330×150 vacuum press designed for thermoforming solid surfaces such as Corian®, Krion®, and other plastics—a combination that sets a new standard for reliability and cost-effectiveness in its class. Its intelligent design integrates both machines into a single chassis, saving valuable workshop space and maximizing the potential of your thermoforming operations.
The machine is equipped with:
- An industrial programmable logic controller (PLC) operated via a touchscreen with 20 programmable menus.
- Two "J" type probes that allow precise measurement of the temperature of the heated material inside.
- A PT100 probe that monitors the oven temperature at all times.
WORKING PARAMETERS
Vacuum press with a usable surface area of 350×150 cm
2 mm silicone membrane, resistant up to 230 °C
Silicone membrane with 700% elasticity, shore A 60/65, density 1,2 gr/cm³
BUSCH brand vacuum pump, 40 m³/h — maintenance-free
Maximum vacuum pressure: up to 9 t/m²
Automatic or manual operation
HPL vacuum table on reinforced chassis
Hot air oven with optimized circulation — method "Turbo hot air" proprietary
Maximum achievable temperature: 190 °C
Triple temperature control with "J" type contact probes and PT 100 probe
Oven insulation with 50 mm rock wool
10″ touchscreen with 12 programmable menus
Audible and visual signal at the end of each cycle
Continuous on-screen temperature monitoring during heating and cooling
Industrial wheels with brakes
Electrical connection: 380 V / 50-60 Hz / 3~
Maximum electrical power: 18 kW — 30 A
Reduced electricity consumption: between 2 and 4 kW/h approx.
2 years warranty
GLASS OPTIONS
- 250 mm high cup membranes for working with molds from 250 to 650 mm high
- 500 mm high cup membranes for working with molds from 500 to 900 mm high
- Sublimation membrane + kit
Main advantages of the product
Isolated and independent working chambers that guarantee optimal heat distribution and maximum energy efficiency, resulting in ultra-fast work cycles and a very low specific energy cost per m² of heated plates.
Advanced software control system that allows monitoring and optimization of all process segments by controlling the different cycle variables: Temperature / Time / Vacuum level / Segment cooling.
Distributed double-layer radiation system, reinforced by a convection system for air homogenization using booster fans «Bugatool Impeler Convection System®», which guarantees a homogenization of heat in the chamber of ±3 °C.
Ergonomic design aimed at optimizing the operator's working conditions in the plant.
Energy savings are achieved through faster cycles, process optimization via platforms with independent cameras, and control software that allows for automatic oven start-up at the desired time. This start-up control function enables the cycle to begin automatically without operator intervention, both at night and in the early morning.
THE MEMBRANE PRESS
Vacuum press equipped with a 2mm silicone membrane, capable of withstanding temperatures up to 230°C.
Features of the silicone membrane:
- 700% Elasticity
- Shore A hardness 60/65
- Density of 1,2 g/cm³
- 2 thickness mm
Performance and reliability:
- Maintenance-free BUSCH brand vacuum pump with a flow rate of 40 m³/h
- Maximum achievable vacuum pressure: up to 9 t/m²
Easy to use:
- Automatic or manual operation, depending on the operator's needs
- High-strength HPL vacuum table for optimal durability
DIMENSIONS
Buga Duo 3015
| Width | Length | Heigh | |
|---|---|---|---|
| Overall Machine Size | 1750 mm. | 3750 mm. | 1050 mm. |
| Useful Oven Interior | 1500 mm. | 3000 mm. | 110 mm. |
| Useful Press Size | 1500 mm. | 3300 mm. | 400 mm (with mould) |
| External frame Size | 1600 mm. | 3500 mm. | 50 mm. |
Total machine weight: 1200 kg.
