English
Español
Français
Русский
Buga Strong
GENERAL FEATURES
The hydraulic press allows the thermoforming of deep basins, up to 15 cm deep. Suitable moulds must be made of closed-circuit cooled aluminum or plywood.
2 presses sizes are available
It is necessary to use a hot air oven to preheat the materials before thermoforming.
The cooling time will depend on the mould system used.
TECHNICAL DESCRIPTION
- Hydraulic press with single-block steel cylinder system
- 50 mm thick aluminium benches and compensation guides
- Maximum pressure achieved: up to 60 t/m2
- Hydraulic pump with a tank with 9 Liters of oil
- 1 or 2 hydraulic pistons according to model
- Bottom bench adjustable according to mould
- Adjustable pressure with lever
- 24v DC Control Panel
- Button for emergency
- Safety valve with directional control
- Electrical connection 380v / 50-60Hz/ 3~
- Maximum electrical power 2.2 kW- 3 HP
- Warranty 2 years
DIMENSIONS – Buga Strong 1350
| Width | Length | Height | |
|---|---|---|---|
| Machine Size Off-All | 2050 mm. | 900 mm. | 2500 mm. |
| Useful size for press | 1350 mm. | 800 mm. | 380 mm. |
| Piston course | - | - | 400 mm. |
Total machine weight: 1500 kg.
DIMENSIONS – Buga Strong 750
| Width | Lenght | Height | |
|---|---|---|---|
| Machine Size Off-All | 1100 mm. | 900 mm. | 2500 mm. |
| Useful size of press | 750 mm. | 800 mm. | 380 mm. |
| Piston course | - | - | 400 mm. |
Total machine weight: 1200 kg.
OPTIONS
- Pressure control pedal
APPLICATIONS
The BUGA Strong has been designed to thermoform the following materials:
- Solid surfaces (Avonite, Corian, Hanex, Hi-Macs, Krion, Kerrock,Betacryl,V-korr, …),
- Thermoplastics (ABS, PMMA, PET, Kydex, etc.)
- Thermoformables woods (Weden, UMP grada 2000, etc.)
- Las maderas termoformables (Weden, UMP grada 2000, etc.)
