Buga Duo Lift 3812
The BUGA Duo Lift 3812 is the combination oven and membrane press that will allow you to work entire solid surface sheets effortlessly as its frame is supported by pneumatic Pistons.
The oven and the vacuum press are mounted on the same chassis to optimize the space in your workshop and optimize its use.
The machine is equipped with a PLC (Programmable Logic Controller) assisted by a 13-inch touch screen allowing the application of 20 programs. Two “k” probes tell you the core temperature of the material during heating and cooling. This way you control at any time the heating of your resin plate regardless of its size.
This patented technology gives the BUGA Duo an unprecedented level of reliability.
Because heating the solid surfaces should not obey only the variable time.
The BUGA Duo 3812 is suitable for industrial thermoforming of Solid surface, PMMA and other thermoformable polymers.
The manufacturing rate is about 25 minutes per 12 mm thick panel.
- 2 mm thick silicone membrane press, supports up to 230ºC
- The silicone membrane has 700% elasticity a shore A 45/50 and a specific weight of 1.2 gr/cm3
- Becker brand 40m3/h maintenance-free vacuum pump
- Maximum pressure: 9 t/m2
- Automatic or manual work mode
- Pneumatic pistons allow for effortless mounting and lowering of the frame
- Multi perforated and epoxy lacquered metal vacuum table
- Hot air furnace ventilated by 4 circuit turbines specially designed for its homogeneity and patented.
- Maximum temperature: 190ºC
- Triple temperature control with 2 “k” probes and one PT100 probe
- Oven insulated with 50 mm rock wool
- 13” touch screen with 20 programmable menus
- Buzzer sound and light to indicate the end of the cycle
- Temperature control on the touch screen to monitor the heating of materials and the cooling of thermoformed parts.
- Industrial wheels with brakes
- Schneider Electric brand electrical components
- Electrical connection 380v / 50-60Hz
- Max power: 19.5 kW
- Average power consumption of 3 to 5 kW/h aprox.
- 2 years warranty
DIMENSIONS – Buga Duo Lift 3812
|Machine Size Off-All||1700 mm.||4500 mm.||1050 mm.|
|Useful size of the oven||1250 mm.||3800 mm.||110 mm.|
|Useful size of vacuum press||1300 mm.||3900 mm.||400 mm with mould|
|External dimensions of the frame||1400 mm.||4080 mm.||50 mm.|
Total machine weight: 1750 kg.
• 250 mm high membranes for sizes between 250 and 650mm high.
• 500 mm high membranes for sizes between 500 and 900 mm high.
• Sublimation bag + kit
The BUGA Duo has been designed to thermoform the following materials :
- Solid surface (Avonite, Corian, Hanex, Hi-Macs, Krion, Kerrock, Betacryl, V-korr, etc.),
- Los thermoplastics (ABS, PMMA, PET, Kydex, etc.)
- Thermoformables Woods (Weden, UMP grada 2000, etc.)